This is a Guaranteed Brand New Original Equipment Manufacturer (OEM) Philips® Lamp Replacement P22 100W/120W 1.0 for your UX21516 enclosure, used in Hitachi® LCD Projection TV . It has a 6 Month Warranty .
Enclosure is not included. If you want to buy the whole enclosure with lamp (which is easier to replace) click this link.
This Genuine Philips® TOP UHP 100W/120W 1.0 bulb is a compatible replacement for Hitachi® rear projection TV's
It is very easy to replace your lamp. You will find step by step instructions at http://guides.fixyourdlp.com/hitachi/UX21516.php
Compatible with at least the following Hitachi TVs: 50" Hitachi Projection LCD Models: 50VF820 50VG825 50VS810A55" Hitachi Projection LCD Models: 55VF820 55VG82560" Hitachi Projection LCD Models: 60VF820 60VG825 60VS810A
Your Hitachi TV has 3 LED indicators that can help you when troubleshooting. The meaning and action to take for each code are described below:Lamp LED ON: No lamp light or broken lamp. Need to replace if lamp still does not light by "Power On" again.Lamp LCD blinking: Wrong lamp unit assembly / lamp door open. Need to replace if lamp still does not light by "Power On" again.Temp LED ON: Too hot inside the OPTIC unit. Call for service.Temp LED blinking: Cooling fan stopped. Call for service.Power LED Light ON: Normal operation.Power LED Short Blinking (0.3 sec cycle): Beginning of cool down (for 20 sec., TV cannot accept any code in this period except within the beginning 5 sec.)Power LED Intermediate Blinking (0.5 sec cycle): Beginning of warm up after the power ON.Power LED Long blinking (1 sec cycle): Cool down (for 6 minutes, TV can accept remote control and side buttons)
If the Lamp, Temp, and Power LED are blinking in the following order, the TV is warming up: POWER -> TEMP -> LAMP
NOTE : Make sure the lamp unit and door is installed securely; otherwise, the TV may not turn on.
You can also try our Projection TV Troubleshooting Wizard
Find your Hitachi owner's manual here.