Brand New Toshiba® Y67-LMP TV Lamp Replacement for Toshiba® Rear Projection DLP TV's

This is the Replacement Lamp Only (also referred to as the BARE Bulb).

For instructions on removing the lamp from your TV you can click here.

***NOTES: This lamp is DC type bulb and carries a 90-Day Warranty
***Extended Warranty Not Available for this product

This part is also known as:
Y67-LMP (Y67LMP)
Y67-LMB
Y67LMB
75007091
75007091X
75007091RL
75007091T
75008204
75008204X
75008204T
75008204RL
72514011
72514011T
72514011X
GLH-110
L9003 (Plastic Holder)
L7001
L7002
L7018
V9B00007500
PPS+GF65

Replaces:  Toshiba, SHP109, 150W, 38-100V, Hg

This is a special DC lamp and has polarity unlike other AC based Rear Projection TV lamps.  This means that there is a POSITIVE and NEGATIVE terminal on the lamp itself.  For this reason we will be shipping this product with it's cable pre-installed onto the lamp for your convenience and to reduce user error.  This lamp is a guaranteed compatible replacement for at least the following TV's:
57" Toshiba® DLPs
57HM117
57HM167
65" Toshiba® DLPs
65HM117
65HM167

Find your Toshiba Owner's Manual here.

You just need to remove your old enclosure and slide the new assembly in place. However, you can click here for detailed instructions.

Click here for commonly asked questions

If you are not sure you need a lamp, see the LED lights at the bottom center of the TV, the yellow, blue, and red/green LED's indicate the TV’s status as described below:



1) Blue is ON (solid): The TV is operating properly.
2) Green is ON (solid): Power-ON Mode Fast.
3) Yellow blinks: Standby with Power-On Mode Fast.
4) Blue is ON (solid), Yellow blinks: The lamp is not working properly. The TV will automatically try to restart itself eight times. NOTE: If the TV is powered off and then quickly on again when the lamp unit is hot, it may take several minutes for the picture to appear on-screen. This is a property of DLP TV lamp technology and is NOT a sign of malfunction.
5) Yellow is ON (solid), Red blinks: The lamp is not working properly after the eight automatic restart. Turn the TV OFF and ON again.
6) Yellow is ON (solid): The lamp unit door is not seated properly. Turn OFF the TV and unplug the power cord. Ensure that the lamp door is installed securely and try again.
7) Red blinks: Fan stopped. Turn OFF the TV and unplug the power cord. Plug the power cord in again and turn ON the TV.
8) Blue blinks slowly, Red blinks: Abnormal operation of BUS line. (light engine) Same solution as (7).
9) Blue blinks slowly: Abnormal operation of BUS line. Same solution as (7).
10) Blue blinks quickly: Power Protect Detection. Same solution as (7).
11) Blue blinks quickly, Red blinks: The color wheel has stopped. Same solution as (7).
12) Blue blinks quickly, Yellow blinks, Red blinks: An abnormal temperature increase has ocurred. Turn OFF the TV. Check to make sure none of the slots or openings in the TV cabinet are covered, blocked, or dusty. Turn ON the TV again.

If still not sure we have a TV Troubleshooting Tool.