SonyŽ XL-2000 TV Lamp Assembly Replacement for SonyŽ WEGA Rear Projection DLP TV's

This is the Original Equipment Manufacturer (OEM) Lamp Housing (also referred to as the lamp enclosure, cartridge or cage).

This assembly unit is also known as:
XL2000
XL2000U
XL2000E
XL-2000U
XL-2000E
A1601753A
A1601-753-A
A-1601-753A
A-1601753A

This genuine Sony housing is a compatible replacement for at least following TV's:
KF-42SX200
KF42SX2000
KF-50XBR800
KF-60DX100
KF-60XBR800

NOTE: We frequently run out of these enclosures. To purchase the lamp only (which is a Philips P23 100W/120W 1.3) and reuse your old enclosure click here. For detailed step by step instructions here.

If you're not sure the problem is the lamp, we recommend you to use our Projection TV troubleshooting Wizard, also your PDF owner's manual is available here.

The POWER/STANDBY (red) and/or LAMP (red) LED's indicate the conditions of the LCD projection TV and warnings by lighting or flashing, as follows.



The POWER/STANDBY indicator flashes: The lamp for the light source is ready to turn on.
The POWER/STANDBY indicator flashes three times: The lamp cover is not attached securely. When you correct, the POWER/STANDBY indicator goes out and the LCD projection TV enters the standby mode.
The LAMP indicator flashes: The lamp for the light source burns out. Replace it with a new one.

Click here for commonly asked questions, visit our knowledge base
Visit our newly created discussion boards!