Philips Original LCOS Replacement Lamps 3122 438 71310

You are here: Home > Projection TV LAMPS > Philips Original LCOS Replacement Lamps

The Philips LCOS RPTV is more than just a new DLP TV. The display utilizes a technology called Liquid Crystal on Silicon (LCOS), which creates an image in a display that's about half as deep as a typical CRT-based rear-projection system. LCOS is like a cross between liquid crystal display (LCD) and Digital Light Processing (DLP). Using Original Philips lamps are crucial to great picture quality from your LCOS projection telvision. Buy the original lamp made for and pioneered by Philips!

Sort By:

Page of 1


New Philips "small" Lamp plus Philips Lamp Adapter P132W Kit Promotional Price $115.99

Promotional price for a limited time only, visit http://www.FixYourDLP.com/blog for additional information regarding this product. NOTE: For compatibility you need to insure: 1) You lamp is a "1.0" mm arc lamp. This should be written on the lamp itself after the wattage 2) Your ballast pumps out 120W, not 100W. This will be written on the ballast itself in the form of "EUC 120" versus "EUC 100" If you have a "EUC 100" ballast, that means this kit is not compatible with your TV. You will want to you this kit instead: http://www.discount-merchant.com/PLA-100W-120W-1-0-UHP-Lamp-Adapter-Kit-p/new_philips_plus_pla_120w.htm If you need help identify either of the above, please contact us! Make sure you have your lamp in hand and/or you've removed your lamp enclosure from the TV and you've can physically see the ballast. If you're unsure about whether this lamp will work for your TV, contact us. The Philips lamp adapter is pre-installed (assembled) around the lamp. You can replace your old lamp as if you were replacing it with the same lamp. Take out the old lamp, put in this new lamp+adapter, and viola, your done! You're got a much improved lamp now! :)